Master teaches you to look at these four points, no longer afraid of being pit!

Every home renovation involves the use of water pipes. Buying water and electricity materials is the first step in decorating, but many people may not pay much attention to the choice of plumbing. In fact, if the water pipe selection is not good, not only cause trouble in the future life, but also greatly affect the quality of water, therefore, in the purchase of water pipe this piece, absolutely can not be careless, so as to avoid disease.

When we choose domestic water pipes, most of us will choose water pipes made of PPR, which is cost-effective and resistant to rust or corrosion, while municipal pipes use PE pipes. When choosing PPR water pipe, we must look at the following points:

1, PPR water pipe wall thickness should be qualified.

Like household water PPR water pipe, generally divided into cold water pipe and hot water pipe two. Hot water pipes can be used instead of cold water pipes, but cold water pipes cannot be used instead of hot water pipes, because the wall thickness of cold water pipes will be thinner. The wall thickness of the cold water pipe (s5 series) should not be less than 2.9mm, and the wall thickness of the hot water pipe (s3.2 series) should not be less than 4.4mm. Measure it with a vernier caliper to ensure that the wall thickness of the water pipe meets the requirements. Too thin wall thickness is liable to cause water pipe burst in the future, this should be understood..

2. The appearance of PPR water pipe is smooth without depression, and the production mark is clearly visible.

Good PPR water pipe its appearance is smooth, uniform color, there is no depression. Touch the outer wall of the pipe with your hand, and you will feel smooth and smooth without rough texture. That kind of rough feel PPR tube must be doped with impurities of inferior goods.

Good PPR water pipe its appearance is smooth, uniform color, there is no depression. Touch the outer wall of the pipe with your hand, and you will feel smooth and smooth without rough texture. That kind of rough feel PPR tube must be doped with impurities of inferior goods.

3. High quality PPR water pipe is light proof.

PPR water pipe regardless of color or no color, must do certain, that is: Opaque, especially to buy the white PPR water pipe, after going home with a flashlight, if found, it proves that the quality of the PPR water pipe is not good, the wall thickness, the density is small, the most critical is that the transparent water pipe will easily cause the breeding of bacteria and microorganisms in the pipeline, causing secondary pollution.

4. No black smoke and pungent smell after burning PPR water pipe.

If you really can not identify from the appearance of the purchase is genuine and qualified PPR water pipe, may wish to take a small cut to burn. High-quality PPR water pipes do not have any pungent smell after burning, and will not give off black smoke. If you observe the residue after burning, you will find that it is clean without too many impurities.

On the contrary, if the burning has a pungent plastic taste and black smoke, the burning residue has black substances, which indicates that the quality of the PPR water pipe is not qualified, it is likely to contain toxic and harmful substances, can not be used.

PPR water pipe is the main water supply pipe material in the home decoration market. Be sure to polish your eyes when choosing, there are many similar products on the market today, using waste, old material shoddy, fish-eye mixed beads, if not carefully selected to this quality unqualified PPR water pipe, easy to cause pollution to the water quality, so be careful to choose.

The PPR pipes and fittings produced by Hebei Shantong Plastic Industry Co., Ltd. are all produced with new imported raw materials, with good quality and reasonable price. We believe in our FOSITE brand, please feel free to buy, looking forward to your contact!